曹阳于澳大利亚悉尼大学获得博士学位。博士后工作于澳大利亚新南威尔士大学，获校长博士后项目资助。现阶段就职于河海大学，任职教授。曹阳长期以来致力于结构材料微观变形机理和使役性能的研究，主要包括纳米结构材料和异质结构材料。并在相关领域发表了SCI论文65篇，其中第一作者和通讯作者论文26篇。总引用次数超过3300次。H-index = 34。曹阳的科研成果曾多次被国内媒体报导，包括我国的科技日报（2018年10月11日的报纸头版）。2018年，曹阳和相关领域的几位国内外专家围绕金属材料微观变形机理进行了综述性报道，将结果发表在Materials Science and Engineering: R Report.杂志上，影响因子 26.48。曹阳曾经第一个提出了“利用双相材料将高压扭转变形施加的剪切应力视觉化”的方法。通过将剪切应变视觉化的方法，曹阳所在的团队观测到了不均匀应变分布导致的应力集中现象，以及随着剪切应变的不断增加，剪切应力的分布逐渐趋向于理想化的状态。相关的研究成果得到了所在领域专家们的高度评价，例如，康涅狄格大学（University of Connecticut）的Prof. Mark Aindow, 曾这样评价曹阳的工作 “I think that this is a very interesting contribution that could attract significant interest and so I have also asked for this paper to be accelerated through the production process”.相关成果帮助曹阳赢得了美国2010TMS青年学者口头报告奖（UFG VI Young Scientist Award - The Minerals, Metals & Materials Society，2010 Annual Meeting & Exhibition, Seattle, Washington, USA, Feb. 2010）。

现阶段，曹阳在材料科学领域的主要研究方向有（1）层错能对纳米异质结构材料的微观结构和力学性能的影响；（2）纳米异质结构材料中的剪切带分散效应；（3）材料微观结构的跨尺度多级构筑及其对材料使役性能的影响 – 单相金属材料、双相钢、金属基复合材料；（4）增材制造金属材料。

曹阳师承国际著名电子显微学专家,澳大利亚悉尼大学的廖晓舟（Prof. Xiaozhou Liao）教授，具备扎实的电子显微学基础。曹阳是最早一批参与透射背散射电子衍射（TKD）技术研发的成员之一，曾合作发表关于TKD技术的文章（P.Trimby, Y.Cao et al. Acta Mater. 62 (2014) 69–80），在科研界有很高的认可度。在实验技术方面，曹阳现阶段致力于原位透射电镜技术、EBSD/TKD数据分析技术、以及数字图像关联技术（DIC）的应用和开发。

在立德树人方面，曹阳承担三门本科生基础课程《材料科学基础（Ⅰ）》、《金属材料》、《工程材料及成形工艺》；为国际留学生开设两门全英课程《材料加工（Ⅰ）》、《先进材料加工技术》。还参与了网络慕课《材料科学基础》的建设。参与江苏省品牌专业和国家一流专业《材料科学与工程》学科建设，负责《材料强韧化与组织调控》特色专业课程的建设。完成指导本科生毕业设计9名，科研训练5名，硕士研究生7名。协助指导博士研究生3名。一名博士研究生获得了CSC国家公派留学人员奖学金的全额资助，赴美国麻省大学（University of Massachusetts--Amherst）深造，毕业后回本团队做博士后，获得了江苏省青年基金项目资助。

曹阳简历

河海大学，材料科学与工程学院，教授

教育经历

(1) 2010-1 至 2013-5, 澳大利亚悉尼大学, 材料工程, 博士, 导师: Prof. Xiaozhou Liao

(2) 2008-2 至 2008-11, 澳大利亚悉尼大学, 机械工程, 硕士, 导师: Prof. Xiaozhou Liao

(3) 2004-2 至 2007-11, 澳大利亚悉尼大学, 机械工程, 学士

科研与学术工作经历

(1) 2024-2 至 现在，河海大学，材料科学与工程学院，教授

(2) 2016-6 至 2024-1, 南京理工大学, 材料科学与工程学院/格莱特研究院, 副教授

(3) 2014-1 至 2016-5, 澳大利亚新南威尔士大学, 博士后, 导师: Prof. Liangchi Zhang

专业技术：

1. 背散射电子衍射EBSD/TKD实验分析技术；

2. 透射电子显微镜TEM/HRTEM数据分析技术；

3. 高分辨数字图像关联SEM+DIC技术；

4. 显微/纳米压痕试验技术。

5. X-射线衍射实验分析技术；

主持或参加科研项目（课题）（按时间倒序排序）：

1. 主持

   1. 国家自然科学基金委员会，国家面上项目，52071181，层错能对面心立方纳米异质结构材料的微观结构和力学性能的影响，2021-01 至 2024-12，58万元，在研；

   2. 国家自然科学基金委员会，国家青年科学基金项目，51601094，梯度纳米结构双相不锈钢微观结构与力学性能研究，2017-01 至 2019-12，20万元，结题。

2. 参与

   1. 国家自然科学基金委员会，重点项目，51931003，金属材料跨尺度异构的强韧化及微结构调控，2020-01 至 2024-12，300万元，在研；

   2. 国家自然科学基金委员会，国家面上项目，51971112，旋锻变形技术制备高强、高导、高热稳定、低成本的可工业化应用的纳米/超细晶铜、铝合金导线的探索研究，2020-01 至 2023-12，60万元，在研；

   3. 科学技术部高技术研究发展中心，国家重点研发计划纳米科技重点专项，2017YFA0204400，新型纳米金属材料的构筑及使役行为研究，2017-11 至 2022-11，4460万元，在研；

   4. 科学技术部高技术研究发展中心，国家重点研发计划“纳米前沿”重点专项，2021YFA1200200，非均匀纳米材料力学行为及微观机理的跨尺度原位研究，2021-11 至 2026-11，2000万元，在研；

讲授课程及其它教学任务经历：

1. 材料加工（Ⅰ）【英】，本科基础课，3学分，48学时

2. 先进材料加工技术【英】，本科专业基础课，2学分，32学时

3. 材料科学基础（Ⅰ），本科基础课，1.5学分，24学时

4. 金属材料，本科专业基础课，2学分，32学时

5. 工程材料及成形工艺，本科专业基础课，3学分，48学时

6. 科研训练，实践必修

7. 毕业设计（论文），实践必修

代表性研究成果和学术奖励情况

一、学术奖励

1. 《异质纳米结构材料的变形机理对材料力学性能的影响》，江苏省双创博士，2017 年12 月27 日，20万元。

2. 澳大利亚新南威尔士大学，校长博士后奖学金（Vice-Chancellor’s Postdoctoral Research Fellow, the University of New South Wales, Australia）,2014；

3. 澳大利亚悉尼大学，科技进步奖（Research Excellence Award 2013, the University of Sydney, Australia）,2013；

4. 澳大利亚悉尼大学, 科技创新奖（Sydnovate Runner-Up Award for Excellence in Innovation at the Research Conversazione 2011, the University of Sydney, Australia）, 2011；

5. 中国国家留学基金管理委员会,中国国家优秀自费留学生奖学金, 2012；

6. 美国TMS材料大会，青年学者口头报告奖（UFG VI Young Scientist Award, TMS (The Minerals, Metals & Materials Society, the USA）, 2010；

7. 澳大利亚电镜学会，学生奖学金（ACMM-21 bursaries, The Australian Microscopy and Microanalysis Society Inc. , Australia）,2010；

8. 澳大利亚悉尼大学，全额奖学金（University of Sydney Postgraduate Awards, the University of Sydney, Australia）,2010；

一、代表性论著

Google Scholar总引用3000+，H-index 27.

第一作者和通讯作者论文：

1. Enhancing strength and ductility of Al-matrix composite via a dual-heterostructure strategy, Jinfeng Nie*, Yuyao Chen, Lei Song, Yong Fan, Yang Cao*, Kewei Xie, Sida Liu, Xiangfa Liu, Yonghao Zhao*, Yuntian Zhu*, International Journal of Plasticity 171 (2023) 103825

2. Yanfang Liu, Jie Ren, Jian Liu, Yang Cao*, Wei Liu, Tianyi Li, Yuntian Zhu, Wen Chen*, Exceptional thermal stability of additively manufactured CoCrFeMnNi high-entropy alloy with cellular dislocation structures, Materials Science & Engineering A 885 (2023) 145650.

3. Yi Liu, Mengning Xu, Lirong Xiao, Xuefei Chen, Zhaohua Hu, Bo Gao, Ningning Liang, Yuntian Zhu, Yang Cao*, Hao Zhou*, Dislocation array reflection enhances strain hardening of a dual-phase heterostructured high entropy alloy, Materials Research Letters 11 (2023) 638-647.

4. Yanfang Liu, Jie Ren, Shuai Guan, Chenyang Li, Yin Zhang, Saideep Muskeri, Zhiyuan Liu, Dunji Yu, Yan Chen, Ke An, Yang Cao*, Wei Liu, Yuntian Zhu, Wei Chen, Sundeep Mukherjee, Ting Zhu, Wen Chen*, Microstructure and mechanical behavior of additively manufactured CoCrFeMnNi high-entropy alloys: Laser directed energy deposition versus powder bed fusion, Acta Materialia 250 (2023) 118884.

5. Yanfang Liu, Yang Cao*, Wei Liu, Qingzhong Mao, Hao Zhou, Yonghao Zhao, Yuntian Zhu*, Adiabatic shear localization induced by rotationally accelerated shot peening, Journal of Materials Science 58 (2023) 1670-1679

6. Luling Wang, Bin Liu, Jianqiu Zhou*, Yang Cao*, Feng Zhang, Yonghao Zhao*, Unconventional dislocation starvation behavior of medium-entropy alloy single crystal pillars containing pre-existing dislocations, Journal of Materials Science & Technology 142 (2023) 60–75

7. Wei Jiang, Yang Cao*, Shengyun Yuan, Yong Zhang, Yonghao Zhao*, Creep properties and deformation mechanisms of a Ni₂Co₁Fe₁V_0.5Mo_0.2 medium-entropy alloy, Acta Materialia 245 (2023) 118590.

8. Yanfang Liu, Yu Zang, Yang Cao*, Wei Liu, Qingzhong Mao, Hao zhou, Wei Jiang, Yonghao Zhao, Yuntian Zhu*, Significance of surface layer integrity for sustaining the ductility of gradient-structured nickel, Materials Letters 303 (2021) 130491.

9. Wei Jiang, Shengyun Yuan, Yang Cao∗, Yong Zhang∗, Yonghao Zhao*,Mechanical properties and deformation mechanisms of a Ni 2 Co 1 Fe 1 V 0.5 Mo 0.2 medium-entropy alloy at elevated temperatures, Acta Materialia 213 (2021) 116982.

10. W. Jiang, Y. Cao*, Y.D. Jiang, Y.F. Liu, Q.Z. Mao, H. Zhou, X.Z. Liao, Y.H. Zhao*, Effects of nanostructural hierarchy on the hardness and thermal stability of an austenitic stainless steel, Journal of Materials Research and Technology, 12 (2021) 376-384.

11. J.F. Nie*, Y.F. Liu, F. Wang, H. Zhou, Y. Cao*, X.F. Liu, X.H. An, X.Z. Liao, Y.T. Zhu, Y.J. Zhao, Key roles of particles in grain refinement and material strengthening for an aluminum matrix composite, Materials Science and Engineering: A 801 (2021) 140414.

12. N.N. Liang, X. Wang, Y. Cao*, Y.S. Li, Y.T. Zhu, Y.H. Zhao*, Effective surface nano-crystallization of Ni₂FeCoMo_0.5V_0.2 Medium Entropy Alloy by Rotationally Accelerated Shot Peening (RASP), Entropy, 22 (2020) 1074.

13. Y. Liu, Y. Cao*, Q. Mao, H. Zhou, Y. Zhao, W. Jiang, Y. Liu, J.T. Wang, Z. You, Y.T. Zhu*, Critical microstructures and defects in heterostructured materials and their effects on mechanical properties, Acta Mater. 189 (2020) 129-144.

14. H. Liang, N. Luo*, T. Shen, X. Sun, X. Fan, Y. Cao*, Experimental and numerical simulation study of Zr-based BMG/Al composites manufactured by underwater explosive welding, Journal of Materials Research and Technology 9(2) (2020) 1539-1548.

15. J.X. Zhang, Y. Cao*, H.L. Gao, X. Yang, B.P. Shu, Y.T.T. Zhu, B. Sharma, K. Ameyama, X.K. Zhu*, Influence of Strain Rate on Mechanical Behaviours of Gradient-Structured Copper, Materials Transactions 61(4) (2020) 708-717.

16. W. Jiang, H. Zhou, Y. Cao*, J. Nie, Y. Li, Y. Zhao, M. Kawasaki, T.G. Langdon, Y. Zhu, On the Heterogeneity of Local Shear Strain Induced by High-Pressure Torsion, Advanced Engineering Materials 22(1) (2020) 1900477.

17. Y. Liu, F. Wang, Y. Cao*, J. Nie*, H. Zhou, H. Yang, X. Liu, X. An, X. Liao, Y. Zhao, Y. Zhu, Unique defect evolution during the plastic deformation of a metal matrix composite, Scr. Mater. 162 (2019) 316-320.

18. Z.W. Huang, S.B. Jin, H. Zhou, Y.S. Li*, Y. Cao*, Y.T. Zhu, Evolution of twinning systems and variants during sequential twinning in cryo-rolled titanium, International Journal of Plasticity 112 (2019) 52-67.

19. Y. Cao*, S. Ni*, X. Liao, M. Song, Y. Zhu, Structural evolutions of metallic materials processed by severe plastic deformation, Materials Science and Engineering: R: Reports 133 (2018) 1-59.

20. Y. Cao, L.C. Zhang, Y. Zhang, Twinning interactions induced amorphisation in ultrafine silicon grains, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process. 658 (2016) 321-325.

21. Y. Cao, Y.B. Wang, X.H. An, X.Z. Liao, M. Kawasaki, S.P. Ringer, T.G. Langdon, Y.T. Zhu, Grain boundary formation by remnant dislocations from the de-twinning of thin nano-twins, Scr. Mater. 100(0) (2015) 98-101.

22. Y. Cao, Y.B. Wang, X.H. An, X.Z. Liao, M. Kawasaki, S.P. Ringer, T.G. Langdon, Y.T. Zhu, Concurrent microstructural evolution of ferrite and austenite in a duplex stainless steel processed by high-pressure torsion, Acta Mater. 63 (2014) 16-29.

23. Y. Cao, Y.B. Wang, Z.B. Chen, X.Z. Liao, M. Kawasaki, S.P. Ringer, T.G. Langdon, Y.T. Zhu, De-twinning via secondary twinning in face-centered cubic alloys, Materials Science and Engineering: A 578(0) (2013) 110-114.

24. Y. Cao, Y.B. Wang, X.Z. Liao, M. Kawasaki, S.P. Ringer, T.G. Langdon, Y.T. Zhu, Applied stress controls the production of nano-twins in coarse-grained metals, Appl. Phys. Lett. 101(23) (2012) 231903.

25. Y. Cao, Y.B. Wang, R.B. Figueiredo, L. Chang, X.Z. Liao, M. Kawasaki, W.L. Zheng, S.P. Ringer, T.G. Langdon, Y.T. Zhu, Three-dimensional shear-strain patterns induced by high-pressure torsion and their impact on hardness evolution, Acta Mater. 59(10) (2011) 3903-3914.

26. Y. Cao, M. Kawasaki, Y.B. Wang, S.N. Alhajeri, X.Z. Liao, W.L. Zheng, S.P. Ringer, Y.T. Zhu, T.G. Langdon, Unusual macroscopic shearing patterns observed in metals processed by high-pressure torsion, Journal of Materials Science 45(17) (2010) 4545-4553.

27. Y. Cao, Y.B. Wang, S.N. Alhajeri, X.Z. Liao, W.L. Zheng, S.P. Ringer, T.G. Langdon, Y.T. Zhu, A visualization of shear strain in processing by high-pressure torsion, J. Mater. Sci. 45(3) (2010) 765-770.

合作者论文：

1. Yaru Gong, Shihua Zhang, Yunxiang Hou, Shuang Li, Chong Wang, Wenjie Xiong, Qingtang Zhang, Xuefei Miao, Jizi Liu, Yang Cao, Di Li, Guang Chen* and Guodong Tang*, Enhanced Density of States Facilitates High Thermoelectric Performance in Solution-Grown Ge- and In-Codoped SnSe Nanoplates, ACS Nano 17 (2023) 801−810.

2. Zhaowen Huang, Donghui Wen, Xionghua Jiang, Anding Wang*, Yusheng Li, Yang Cao, Xiaodong Hou*, Biao Wang*, Yuntian Zhu, Additional dislocation slip determined excess yield stress in titanium, Materials Science & Engineering A 861 (2022) 144387.

3. Shuang Li, Yunxiang Hou, Di Li, Bo Zou, Qingtang Zhang, Yang Cao, Guodong Tang*, Realization of high thermoelectric performance in solution-synthesized porous Zn and Ga codoped SnSe nanosheets, Journal of Materials Chemistry A (2022).

4. Q. Zhang, Z. Ti, Y. Zhu, Y. Zhang, Y. Cao, S. Li, M. Wang, D. Li, B. Zou, Y. Hou, P. Wang, G. Tang, Achieving Ultralow Lattice Thermal Conductivity and High Thermoelectric Performance in GeTe Alloys via Introducing Cu2Te Nanocrystals and Resonant Level Doping, ACS Nano 15(12) (2021) 19345-19356.

5. Zhouwen Jiang, Lilong Zhu, Lianxu Yu, Baoan Sun, Yang Cao, Yonghao Zhao*, Yong Zhang*, The mechanism for the serrated flow induced by Suzuki segregation in a Ni alloy, Materials Science & Engineering A 820 (2021) 141575.

6. B. Gao, R. Hu, Z. Pan, X. Chen, Y. Liu, L. Xiao, Y. Cao, Y. Li, Q. Lai, H. Zhou, Strengthening and ductilization of laminate dual-phase steels with high martensite content, J. Mater. Sci. Technol. 65 (2021) 29-37.

7. J. Chen, K. Bao, X. Zhang, Y. Cao, Y. Peng, J. Kong, K. Wang, Adiabatic shear band development and following failure in 316L fabricated by an additive manufacturing process, Materials Science and Engineering: A 811 (2021) 141003.

8. K.D. Yao, L. Liu*, J. Ren, Y. Guo, Y.F. Liu, Y. Cao, R. Feng, F.F. Wu, J. Qi, J. Luo, P. K. Liaw, W. Chen*, High-entropy intermetalli c compound with ultra-high strength and thermal stability, Scripta Materialia 194 (2021) 113674.

9. K. Wei, R. Hu, D.D. Yin, L.R. Xiao, S. Pang, Y. Cao, H. Zhou*, Y.H. Zhao*, Y.T. Zhu*, Grain size effect on tensile properties and slip systems of pure magnesium, Acta Materialia 206 (2021) 116604.

10. J. Chen, H.Y. Wei, K. Bao, X.F. Zhang, Y. Cao, Y. Peng*, J. Kong*, K.H. Wang*, Dynamic mechanical properties of 316L stainless steel fabricated by an additive manufacturing process, Journal of materials research and technology 11 (2021) 170-179.

11. B. Gao, Q.Q. Lai, Y. Cao, R. Hu, L.R. Xiao, Z.Y. Pan, N.N. Liang, Y.S. Li, G. Sha, M.P. Liu, H. Zhou*, X.L. Wu*, Y.T. Zhu*, Ultrastrong low-carbon nanosteel produced by heterostructure and interstitial mediated warm rolling, Science Advances 6 (2020) eaba8169.

12. Z.W. Wang, L. Guo, W.Z Xia, Z. Yuan, Y. Cao, S. Ni, M. Song*, An SEM-based approach to characterize the microstructural evolution in a gradient CoCrFeNiMo_0.15 high-entropy alloy, Materials Characterization 161 (2020) 110169.

13. J.F. Nie, F.H. Lu, Z.W. Huang, X. Ma, H. Zhou, C. Chen, X. Chen, H.B. Yang, Y. Cao, X.F. Liu*, Y.H. Zhao*, Y.T. Zhu, Improving the high-temperature ductility of Al composites by tailoring the nanoparticle network, Materialia 9 (2020) 100523.

14. L. Guo, W.Q. Wu, S. Ni*, Z. Yuan, Y. Cao, Z.W. Wang**, M. Song,Strengthening the FeCoCrNiMo_0.15 high entropy alloy by a gradient structure, Journal of Alloys and Compounds 841 (2020) 155688.

15. Y. Liu, Y. Cao, H. Zhou, X. Chen, Y. Liu*, L. Xiao*, X. Huan, Y. Zhao, Y.T. Zhu, Mechanical Properties and Microstructures of Commercial-Purity Aluminum Processed by Rotational Accelerated Shot Peening Plus Cold Rolling, Advanced Engineering Materials 22(1) (2020) 1900478.

16. L.R. Xiao, X.F. Chen, Y. Cao, H. Zhou*, X.L. Ma, D.D. Yin, B. Ye, X.D. Han*, Y.T. Zhu, Solute segregation assisted nanocrystallization of a cold-rolled Mg–Ag alloy during annealing, Scr. Mater. 177 (2020) 69-73.

17. Y. Liu, M. Liu*, X. Chen, Y. Cao, H.J. Roven, M. Murashkin, R.Z. Valiev, H. Zhou*, Effect of Mg on microstructure and mechanical properties of Al-Mg alloys produced by high pressure torsion, Scr. Mater. 159 (2019) 137-141.

18. B. Gao, X. Chen, Z. Pan, J. Li, Y. Ma, Y. Cao, M. Liu, Q. Lai*, L. Xiao, H. Zhou*, A high-strength heterogeneous structural dual-phase steel, J. Mater. Sci. 54(19) (2019) 12898-12910.

19. M.N. Hasan, Y.F. Liu, X.H. An*, J. Gu, M. Song*, Y. Cao, Y.S. Li, Y.T. Zhu, X.Z. Liao*, Simultaneously enhancing strength and ductility of a high-entropy alloy via gradient hierarchical microstructures, International Journal of Plasticity 123 (2019) 178-195.

20. L.R. Xiao, Y. Cao, S. Li, H. Zhou*, X.L. Ma, L. Mao, X.C. Sha, Q.D. Wang, Y.T. Zhu, X.D. Han*, The formation mechanism of a novel interfacial phase with high thermal stability in a Mg-Gd-Y-Ag-Zr alloy, Acta Mater. 162 (2019) 214-225.

21. S.Z. Wang, J.S. Li*, Y. Cao, B. Gao, Q.Z. Mao, Y.S. Li*, Thermal stability and tensile property of 316L stainless steel with heterogeneous lamella structure, Vacuum 152 (2018) 261-264.

22. Z. Pan, B. Gao, Q. Lai*, X. Chen, Y. Cao, M. Liu, H. Zhou*, Microstructure and Mechanical Properties of a Cold-Rolled Ultrafine-Grained Dual-Phase Steel, Materials (Basel, Switzerland) 11(8) (2018).

23. Z. Huang, Y. Cao, J. Nie, H. Zhou, Y.S. Li*, Microstructures and Mechanical Properties of Commercially Pure Ti Processed by Rotationally Accelerated Shot Peening, Materials 11(3) (2018) 366.

24. J. Li, Y. Cao, B. Gao, Y.S. Li*, Y. Zhu, Superior strength and ductility of 316L stainless steel with heterogeneous lamella structure, J. Mater. Sci. 53(14) (2018) 10442-10456.

25. J.S. Li, W.D. Gao, Y. Cao, Z.W. Huang, B. Gao, Q.Z. Mao, Y.S. Li*, Microstructures and Mechanical Properties of a Gradient Nanostructured 316L Stainless Steel Processed by Rotationally Accelerated Shot Peening, Advanced Engineering Materials 20(10) (2018) 1800402.

26. D. Li, J.M. Li, J.C. Li, Y.S. Wang, J. Zhang, X.Y. Qin, Y. Cao, Y.S. Li*, G.D. Tang*, High thermoelectric performance of n-type Bi2Te2.7Se0.3via nanostructure engineering, Journal of Materials Chemistry A 6(20) (2018) 9642-9649.

27. G.D. Tang*, Q. Wen, T. Yang*, Y. Cao, W. Wei, Z.H. Wang*, Z.D. Zhang, Y.S. Li, Rock-salt-type nanoprecipitates lead to high thermoelectric performance in undoped polycrystalline SnSe, Rsc Advances 7(14) (2017) 8258-8263.

28. J.F. Nie, F. Wang, Y.S. Li, Y. Cao, X.F. Liu, Y.H. Zhao*, Y.T. Zhu, Microstructure Evolution and Mechanical Properties of Al-TiB2/TiC In Situ Aluminum-Based Composites during Accumulative Roll Bonding (ARB) Process, Materials 10(2) (2017) 13.

29. Y.S. Li*, L. Li, J. Nie, Y. Cao, Y. Zhao, Y. Zhu, Microstructural evolution and mechanical properties of a 5052 Al alloy with gradient structures, J. Mater. Res. 32(23) (2017) 4443-4451.

30. J.F. Nie, M.X. Liu, F. Wang, Y.H. Zhao*, Y.S. Li, Y. Cao, Y.T. Zhu, Fabrication of Al/Mg/Al Composites via Accumulative Roll Bonding and Their Mechanical Properties, Materials 9(11) (2016) 14.

31. X.H. An, S.M. Zhu, Y. Cao, M. Kawasaki, X.Z. Liao*, S.P. Ringer, J.F. Nie, T.G. Langdon, Y.T. Zhu, Atomic-scale investigation of interface-facilitated deformation twinning in severely deformed Ag-Cu nanolamellar composites, Appl. Phys. Lett. 107(1) (2015) 011901.

32. P.W. Trimby*, Y. Cao, Z. Chen, S. Han, K.J. Hemker, J. Lian, X. Liao, P. Rottmann, S. Samudrala, J. Sun, J.T. Wang, J. Wheeler, J.M. Cairney, Characterizing deformed ultrafine-grained and nanocrystalline materials using transmission Kikuchi diffraction in a scanning electron microscope, Acta Mater. 62(0) (2014) 69-80.

33. S.K. Samudrala, P.J. Felfer, V.J. Araullo-Peters, Y. Cao, X.Z. Liao, J.M. Cairney*, New atom probe approaches to studying segregation in nanocrystalline materials, Ultramicroscopy 132 (2013) 158-163.

34. Q. Guo, L. Chang, L. Ye, Y.L. Wang, H.T. Feng, Y. Cao, Q. Lian, Y. Li*, Residual Stress, Nanohardness, and Microstructure Changes in Whirlwind Milling of GCr15 Steel, Mater. Manuf. Process. 28(10) (2013) 1047-1052.

35. K.Y. Xie, Y. Wang*, Y. Zhao, L. Chang, G. Wang, Z. Chen, Y. Cao, X. Liao*, E.J. Lavernia, R.Z. Valiev, B. Sarrafpour, H. Zoellner, S.P. Ringer, Nanocrystalline β-Ti alloy with high hardness, low Young's modulus and excellent in vitro biocompatibility for biomedical applications, Materials Science and Engineering: C 33(6) (2013) 3530-3536.

36. K.Y. Xie*, S. Shrestha, Y. Cao, P.J. Felfer, Y.B. Wang, X.Z. Liao, J.M. Cairney, S.P. Ringer*, The effect of pre-existing defects on the strength and deformation behavior of alpha-Fe nanopillars, Acta Mater. 61(2) (2013) 439-452.

37. Y.B. Wang, D.D. Qu, X.H. Wang, Y. Cao, X.Z. Liao*, M. Kawasaki, S.P. Ringer, Z.W. Shan, T.G. Langdon, J. Shen, Introducing a strain-hardening capability to improve the ductility of bulk metallic glasses via severe plastic deformation, Acta Mater. 60(1) (2012) 253-260.

38. Y.B. Wang, M. Louie, Y. Cao, X.Z. Liao*, H.J. Li, S.P. Ringer, Y.T. Zhu, High-pressure torsion induced microstructural evolution in a hexagonal close-packed Zr alloy, Scr. Mater. 62(4) (2010) 214-217.

39. Y.B. Wang, J.C. Ho, Y. Cao, X.Z. Liao*, H.Q. Li, Y.H. Zhao, E.J. Lavernia, S.P. Ringer, Y.T. Zhu, Dislocation density evolution during high pressure torsion of a nanocrystalline Ni-Fe alloy, Appl. Phys. Lett. 94(9) (2009) 091911.

会议报告：

1. 2021年4月16日-18日，第七届全国有色金属结构材料制备、加工及应用技术交流会，江苏，镇江，《异构材料中关键性的微观组织和缺陷对力学性能的影响》邀请报告，有证书；

2. 2021年7月8日-12日，中国材料大会2021，福建，厦门，厦门国际会展中心，C10纳米、异构和梯度材料，《纳米异构材料中的塑性失稳现象》邀请报告，有证书；

3. 2021年10月14日-18日，2021年全国电子显微学学术年，广东，东莞，东莞市会展国际大酒店召开，第五分会场：先进显微分析技术在工业材料中的应用，《异质结构材料微观结构解析》邀请报告，无证书；

授权发明专利：

1. 曹阳；黄照文；李玉胜；雍鹏凌；聂金凤；周浩；超高密度孪晶钛及其制备方法，2021-07-07，中国，ZL 2018 1 1187137.7

2. 曹阳；戴文宇；周浩；陈政东；胡祥；一种节能的固液分离净化装置，2021-09-17，中国，ZL 2019 1 0521020.6

3. 曹阳；浦杰；赵永好；聂金凤；周浩；李玉胜；李建生；一种层状纳米异构铝镁合金块体材料制备方法，2021-11-09，中国，ZL 2019 1 0765796.2

4. 曹阳；袁昭；臧钰；赵永好；周浩；聂金凤；李玉胜；一种具有竹节和硬核梯度结构的铜合金棒材的制备方法，2022-03-08，中国，ZL 2019 1 1232847.1

5. 曹阳；臧钰；袁昭；赵永好；周浩；聂金凤；李玉胜；一种具有竹节纳米结构的铜合金的制备方法，2022-02-01，中国，ZL 2019 1 1272739.7

6. 曹阳；高雨奇；臧钰；周浩；李玉胜；聂金凤；赵永好；一种具有双梯度的竹节式纳米结构金属材料及其制备方法，2022-05-24，中国，ZL 2021 1 0257706.6

7. 曹阳；浦杰；毛庆忠；姜伟；戴文宇；肖礼容；周浩；一种高强高韧纳米片层结构铝镁合金制备方法，2022-05-20，中国，ZL 2020 1 0854672.4

8. 曹阳；郇小伟；周浩；李磊；李玉胜；聂金凤；一种荧光纳米粒子标定材料塑性变形流变的方法，2022-12-13，中国，ZL 2018 1 1607468.1